Stat-On-Stilts
TM from Sensata Technologies are custom-built thermostats designed to meet your specific
application requirements. Their patented, tamperproof Klixon
® snap–acting bimetal disc provides reliable,
repeatable switch actuation, for electrical loads ranging from dry circuits to 10A@240 VAC.
The unique welded, single-piece terminal construction insures reliable, low resistance electrical
connections. Rivet joints which may loosen or loose electrical continuity are eliminated.
The core of Stat-On-Stilts is the proven
1NT thermostat. Recognized by all major worldwide
agencies, hundreds of millions of 1NTs are used daily in a wide variety of appliances.
While most Stat-On-Stilts are built to automatically reset 17°C (30°F) below their opening
temperature, custom setpoints and switch configurations are available, including manual reset and
single operation devices.
Qualifications |
File Number |
Category |
UL |
E9977 |
XAPX8 |
CSA |
LR21794 |
482302 |
Performance
Characteristics |
Operating Temperatures |
100°F to 350°F (38°C to 177°C)
Standard setpoints available at 5°F increments. |
Standard Differential |
30°F (16.7°C) |
Minimum Differential |
20°F (11°C) |
Standard Temperatures and Tolerances
Nominal Open Temperature |
Standard Tolerances |
Open |
Close |
100°F to 195°F |
5.5°F |
9.0°F |
200°F to 245°F |
6.5°F |
10.0°F |
250°F to 300°F |
7.5°F |
10.0°F |
305°F to 350°F |
9.0°F |
13.0°F |
This chart is representative of a standard commercial device. Sensata offers specific variants with similar performance that are dependant on customer specifications. For more information, contact us. |
Applications
| • |
Primary temperature limit in as furnaces and unit heaters |
| • |
Electric furnaces |
|
|
| • |
... Anywhere a temperature switch must be remote from electrical terminations |
|
